RePowerToy
Last Activity: Today, 03:17 AM
Joined: 10-13-2017
Location: NM
-
We have been an approved builder for some time. Long before customer sales actually but not sure how many more builders there are on here, Axis, quickdraw... -
I can appreciate trying to keep the stock box other than the precleaner function of it is very restrictive at high demand. Have gutted many of the same...Leave a comment:
-
This is due to programming somewhat, the software is trying not to smoke. It doesn’t allow full fuel without boost so it doesn’t smoke. Converter...Leave a comment:
-
Correct with any tuning your warrantee will be void.
Efi live is a type of tuner, say like HP tuners, you will have to find a local company...Leave a comment:
-
I will see if I can find the part numbers I have used....Leave a comment:
-
I would do a test with the stock maf tube if you can. Just let it sit with or without a filter. This will answer the first question if it’s all Maf...Leave a comment:
-
How many straight free flowing inches of air do you have before and after the maf. Maf sensors are very very sensitive to this. I know a few running a...Leave a comment:
-
You can actually unplug the EGR if you want to see what it does. Will not hurt the engine but will throw a code.Leave a comment:
-
EFI live supports this engine. I do not use it on this engine but I know others have....Leave a comment:
-
How long has it run? The ECM doesn’t command charge until the rpm goes past a point in my experience...Leave a comment:
-
Post some build information and we can help I’m sure. But I know I do not have time to go through 19 pages of a build.Leave a comment:
-
Clearly we have good info on this forum being you are asking for help? Or I’m taking your statement to literally.....
As for a MAF cal...Leave a comment:
-
The stock gauges are run by the body control module not the PCM so you have to tell the BCM to talk to the Cummins PCM. Different can language, not that...Leave a comment:
-
Highly doubt the 3.8 will ever be sold domestically through Cummins. Yes it may be possible and some exist here, but as the years go by I think it will...Leave a comment:
-
EGR is easy to delete. Intake and exhaust manifold are available without EGR from Cummins. Tuning is the only real issue bu5 a few options there.
...Leave a comment:
-
I’ll take a photo at some point.Leave a comment:
-
Tool wasn’t bad, few hundred bucks for the timing tool kit. No way to reset timing without it so a must really. Timing is held by a spring tensioner...Leave a comment:
-
Chain has a normal tensioner on the top cover behind the head. As for timing a timing kit is required to reset the timing, Cummins only tool package....Leave a comment:
-
Block is sleeved, well, I didn’t look that close. But I know it is.
Engine is good design but has some things we will change!
Sent...Leave a comment:
No activity results to display
Leave a comment: