54 results in 0.0090 seconds.
-
Would the direct flow filter systems work for those of us with tighter space constraints? Would the dealers have some of the specs as far as sizing as... -
I had been changing mine about every 5k, just switched to a different filter setup that uses a smaller filter so I may need to adjust the intervalLeave a comment:
-
Low oil pressure fault for the main oil rifle
While waiting for parts for my transmission swap I decided to get the oil filter housing from Axis as my remote set up was constantly leaking. Once I... -
Are you keeping the dual cases or do you have to go a different route with the 4l65e? -
Looks like the cost is reasonable as well. I think the NV4500 has similar ratios but those options are a little big for the little import. -
I had the 2nd one rebuilt and it only made it just over a year, just long enough past the warranty.
I really like the tremec 4050 and the gear...Leave a comment:
-
Were all three W56's? I had the same issue, hopefully the R151F is up to the task.
Have found that 1st/5th gears are notoriously weak on that...Leave a comment:
-
Axis Industries R2.8 to Chevy LS (III & IV) Adapter Kit
Had to go a different route with my build so the subject kit is up for sale, asking $1100 plus shipping. http://www.axisindustriesusa.com/r2-8-to-che... -
Check with Chad, the owner of Quickdraw Brand Adapters. He has a mechanical fan hub kit and also gives the part number for sourcing the fan clutch. h...Leave a comment:
-
Like the incorporation of the winch and fairlead in the rear bumper -
Yes it is. Different set up than what you're planning but maybe it will spark something for you. There are some great breweries down there that I could... -
Marlin Crawler is a great source for Toyota vehicles, LC Engineering is another vendor you might look into for your clutch setup. The clutch setup I have... -
I'm about an hour north of you if you're interested in hearing or driving something with this motor. You're van is going to be a great project.Leave a comment:
-
Depending on where you set the motor, you're probably at least looking at modifying the shifter opening on the transmission tunnel, driveline lengths,... -
From what I've found, the R series are the same bolt pattern as the AX15 so a bellhouse/adapter would work. Was told you'd need to swap out the input...
Leave a comment: